Page 1
100775 SERVER. ASSEMBLY INSTRUCTIONS COASTER FINE FURNITURE www.coastercompany.com REVISION 0 : 08/01/2017 PAGE 1 OF 4...
Page 2
100775 ASSEMBLY INSTRUCTIONS ITEM : ASSEMBLY TIPS : 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Page 3
100775 ASSEMBLY INSTRUCTIONS ITEM : STEP 2 To remove the shelf,unscrew the shelf from shelf support using Phillips head screw driver (NOT INCLUDED) STEP 3 Adjust the height of shelf support. STEP 4 Align and fasten shelf support to shelf using screw and fully tighten with Phillips head screw driver...
Page 4
ANTI - TIPPING KIT PARTS IDENTIFICATION: HARDWARE IDENTIFICATION: SERVER SHORT SCREW LONG SCREW CABLE TIE L BRACKET 2PCS STEP 2 This tip restraint must be attached to a wall Locate the other bracket on the wall over a wall stud and two stud using long screw enclosed.
Need help?
Do you have a question about the 100775 and is the answer not in the manual?
Questions and answers