Advertisement
Quick Links
View Page online:
https://www.sonicwall.com/support/knowledge-base/sonicwall-tz400-wireless-tz400w-out-of-box/170503795770582/
SonicWall TZ400 Wireless (TZ400W) out
of box
Description
NOTE: Video Link: SonicWall TZ400 Wireless (TZ400W) Out of Box Video.The SonicWall TZ400
Wireless package includes the following
SonicWall TZ400 Wireless appliance
3 Antennas
One Ethernet Cable
One Power Adapter
One Power Cord
Advertisement
Summary of Contents for SonicWALL TZ400
- Page 1 View Page online: https://www.sonicwall.com/support/knowledge-base/sonicwall-tz400-wireless-tz400w-out-of-box/170503795770582/ SonicWall TZ400 Wireless (TZ400W) out of box Description NOTE: Video Link: SonicWall TZ400 Wireless (TZ400W) Out of Box Video.The SonicWall TZ400 Wireless package includes the following SonicWall TZ400 Wireless appliance 3 Antennas One Ethernet Cable One Power Adapter...
- Page 2 Quick Start Guide NOTE: The included power cord is approved for use only in specific countries and regions. Before using a power cord, verify that it is rated and approved for use in your location.
- Page 3 Front and Back Views of the SonicWall TZ400W...
- Page 4 SonicWall TZ400W Port Descriptions...
- Page 5 Cabling the SonicWall TZ400W as a Network Gateway Locate the SonicWall ports X0 and X1, port X0 is also label as LAN and port X1 is also label as WAN. Connect your Internet access device such as a cable or DSL modem to SonicWall WAN (X1 port).
- Page 6 Option 1 Option 2...
- Page 7 Access the SonicWall Admin User Interface Connect a PC to the SonicWall LAN (X0) interface or a network switch connected to the LAN interface. You will automatically receive an IP address from the SonicWall appliance. Open a browser to https://192.168.168.168 for access to the SonicWall.
- Page 8 SonicWall TZ400W First time setupSetup Wizard walk through For the first time access as the admin user, you will be offered a choice to use a Setup Wizard or go directly to the SonicWall management Interface. At the Setup Wizard Launch Page, click the Setup Wizard link here.
- Page 9 Click Next. The Admin default login credentials are At the Admin Credentials page Username: admin Password: password NOTE: Update the password for the admin user. This is recommended to keep the admin user secure.
- Page 10 Click Next IP Configuration page The WAN Interface will detect for a DHCP server to retrieve its IP configurations. If no DHCP server is detected or if you wish to enter static IP parameters then click on the link Manual Config.
- Page 11 Click Next. IP Configuration success page The IP configuration for the WAN interface is complete and the Setup Wizard is done. Click Done.