Advertisement
Quick Links
Small Knife Holder SVM-00
Positioning of Machine
Grinding direction: Towards or away from the edge.
Design
The Small Knife Holder SVM-00 complements the Tormek
Knife Jig SVM-45. It extends the usage so that you can
also sharpen even the smallest knives.
It consists of a Guide Bar (1), a Handle Grip (2), and an
Adjustable Clamp (3). The knife handle is fastened with
the Knob (4). The holder is designed to securely hold the
knife without damaging the handle.
The Guide Bar (1) mounts in the jaws of the Tormek Knife
Jig SVM-45 and you sharpen using the same technique
as for the knife jig. The exact edge angle is set by turning
the Adjustable Stop (6) or using the Micro Adjust on the
Universal Support.
SMALL KNIVES
Various carving knives, skew knives
and pocket knives.
Note The height of the bench
must not be too high when
grinding towards the edge.
550–650 mm (22–26") is suitable
depending on your height.
SVM-45
59
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for tormek SVM-00
Summary of Contents for tormek SVM-00
- Page 1 Knob (4). The holder is designed to securely hold the knife without damaging the handle. The Guide Bar (1) mounts in the jaws of the Tormek Knife Jig SVM-45 and you sharpen using the same technique as for the knife jig. The exact edge angle is set by turning...
- Page 2 Mounting the knife 1. Mount the knife in the SVM-00 Mount the knife in the holder Press the Guide Bar and the Check that the knife blade whilst lying flat on a table edge. knife blade against the table. is in line with the Guide Bar.
- Page 3 Set the edge angle and sharpen in the same way as the SVM-45, see p. 54. After sharpening, hone away the burr and polish the bevel on the leather honing wheel. The SVM-45 instruction is also available to download from www.tormek.com. Note Some knives are difficult to mount in line with the Guide Bar.
Need help?
Do you have a question about the SVM-00 and is the answer not in the manual?
Questions and answers