Table of Contents
Advertisement
All manuals and user guides at all-guides.com
I
Setting the timers
You can turn on and off your TV by using the
Setting the Wake Up timer
\/1
1
Press
until the desired period of time appears
on the screen.
1
3
2
4
6
5
WAKE UP TIMER:0H10M
(After 10 minutes)
7
8
9
-
0
JUMP
2
SOUND
PROGR
MODE
WAKE UP TIMER:OFF
(No Wake Up timer)
The Wake Up timer starts immediately after you
have set it.
FAVORITE
2
Select the TV program number or video input
you want to wake up to.
TV
3
Press \/1, or set the Sleep timer if you want the
TV to turn off automatically.
The
indicator on the TV lights up orange when
the TV goes into standby mode.
Setting the Sleep timer
Press
until the desired period of time appears
on the screen.
SLEEP TIMER:30M
(After 30 minutes)
SLEEP TIMER:OFF
(No Sleep timer)
The Sleep timer starts immediately after you have
set it.
Notes
• You can also cancel the Wake Up and Sleep timers by turning off the TV's main power.
• If no buttons or controls are pressed for more than two hours after the TV is turned on using
the Wake Up timer, the TV automatically goes into standby mode.
J
Presetting channels
You can automatically preset up to 100 TV channels in numerical sequence
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.
Presetting channels automatically
from a specified program number
1
Press SELECT until "AUTO PROGRAM" appears
1
2
3
on the screen.
Number
4
5
6
buttons
7
8
9
2
Press + or – once to enter the "AUTO
-
0
JUMP
PROGRAM" mode.
SOUND
2
PROGR
MODE
The on-screen display will start flashing.
3
Press PROGR +/– or the number buttons until
+ or –
the desired program number appears on the
screen.
FAVORITE
4
Press + or – to start presetting channels
PIC MODE
automatically.
SELECT
TV
PROGR +/–
Presetting channels manually
1
Press SELECT until "MANUAL PROGRAM"
appears on the screen.
2
Press + or – once to enter the "MANUAL
PROGRAM" mode.
3
Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.
4
Press + or – until the desired channel picture
appears on the screen.
5
To preset other channels manually, repeat steps
3 to 4.
Presetting channels (continued)
and
buttons respectively.
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal
(1) Press SELECT until "TV SYS" appears on the screen.
(2) Press + or – to select the appropriate TV system until the picture or sound quality
To change the color system setting
If the color is abnormal when receiving programs through the 8 (antenna) terminal
WAKE UP TIMER:12H00M
(After 12 hours)
or the t (video input) terminal
(1) Press SELECT until "COLOR SYS" appears on the screen.
(2) Press + or – to select the appropriate color system until the color is optimal.
To skip program numbers
(1) Press PROGR +/– or the number buttons until the unused or unwanted program
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – once to enter the "MANUAL PROGRAM" mode.
(4) Press PIC MODE to skip the unused or unwanted program number.
(5) Press SELECT to exit the "MANUAL PROGRAM" mode.
Note
• To restore the skipped program number again, preset the channel automatically or manually.
SLEEP TIMER:60M
(After 60 minutes)
To use the fine tuning function
The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
SLEEP TIMER:90M
You can use the fine tuning function as below:
(After 90 minutes)
(1) Select the program number you want to adjust.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – once to enter the "MANUAL PROGRAM" mode.
(4) Press
(5) Press + or – continuously until the above problems are minimized.
(6) Press SELECT to exit the "MANUAL PROGRAM" mode.
K
Adjusting the picture and sound settings
1
2
3
Notes
• "BASS", "TREBLE" and "BALANCE" can be adjusted for KV-TG21M90 only.
• "HUE" can be adjusted for the NTSC color system only.
• Reducing "SHARP" can also reduce picture noise.
– 9 –
KV-TG21M61/TG21M90
is optimal.
B/G
I
D/K
M
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
number appears on the screen.
to display "FINE" on the screen.
The + or – icon on the screen flashes while tuning.
Customizing the picture and sound
You can customize the picture and sound by selecting the picture and sound
modes or by adjusting its settings.
You can change the sound effect by selecting the surround mode.
Selecting the picture mode
Press PIC MODE to select the desired picture mode.
Select
1
2
3
"DYNAMIC"
4
5
6
7
8
9
"STANDARD"
-
0
JUMP
"SOFT"
SOUND
2
PROGR
SOUND
MODE
MODE
Selecting the sound mode
SELECT
Press SOUND MODE to select the desired sound
+ or –
mode.
FAVORITE
Select
PIC MODE
"9 DYNAMIC"
TV
"9 DRAMA"
"9 SOFT"
Press SELECT until the desired setting appears.
Each time you press SELECT, the setting item will change as follows:
PICTURE
COLOR
BRIGHT
HUE
BALANCE
TREBLE
BASS
SHARP
Press + or – to adjust the item.
To adjust other items, repeat steps 1 to 2.
RM-952
To
view high contrast pictures.
view normal contrast pictures.
view mild pictures.
To
listen to dynamic and clear
sound that emphasizes the low
and high sound.
listen to sound that emphasizes
vocals and background music.
listen to soft sound.
Advertisement
Table of Contents
