Preparing The Remote Control - Pyle view PLRDVD10 Operation Manual

19. MODE: Switch video input AV1/AV2
20. VOL+: rise current volume
21. VOL-: debase current volume
22. MUTE: Turn off sound.
23. DIRECTION KEY: Remove cursor direction.
24. FORMAT: Switch video output PAL/NTSC.
25. PREV/NEXT: Press NEXT to skip to the next track & PREV to skip back on e
track.
26. BOOKMARK: Memory play
27. A-B: Setup repeat play segment.
28. AUDIO: Changing of the AUDIO soundtrack on multi-audio soundtrack DVD
disc.
29. SUBTITLE: Select subtitle of disc supply or cancel subtitle.
30. ANGLE: Changing of the view angle on multi-angle DVD disc.
31. LANGUAGE: Choose different output language.
32. STOP: Stop play.
33. PROGRAM: Arrange program.

Preparing the Remote Control

Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure that the positive and negative terminals of
the batteries are oriented indicated.
3. Close the cover
Battery: Two AAA size batteries.
Using the Remote Control
Aim the remote control towards the IR mark (remote control signal receiver)
on the face of the DVD player.
Operation angle: About 30 degrees in each the direction from the front of the
IR mark.
IR SENSOR
±30 Deg ree
11