Maintenance Instructions - Toto MS614114CEF Installation Manual

the supply stop instruction at the location
shown in the Before Installation section.
hose to supply stop.
CAUTION: Hand-tighten only.
Open the supply stop, checking for leak-
psi static.
NOTE:
are needed. The water will automatically
stop at proper level.
per valve for proper operation. Make sure
in its proper position.
top.
bushing nuts into the bowl seat holes.
NO TE:
sary.
Place the seat on the bowl and rotate the
hinge unit into place while holding seat
the bolt from the top with a screwdriver.

MAINTENANCE INSTRUCTIONS

Fill Valve Replacement Procedure
interfere with the trip lever operation.
INSTALLATION PROCEDURE
Ill. 6
Water
Inlet
Washer
Coupling
Nut
Trim Plate
Nipple
-
Ill. 7
-
5
Nut
Compression
Rubber
Brushing
Nut