Basic Equipment - IML FRACTOMETER II Instruction Manual

ENGLISH
Introduction

BASIC EQUIPMENT

Fractometer II
Accessories are included
Accessories:
Knife:
Tweezers:
Test Pin for
Bending Angle
Display:
Cutting
Device:
Cutting of the core sample
Simplification for inserting the core sample in the measuring
device
The bending angle display can be examined with the test pin
in zero position. Insert the test pin into the bending device and
link up the bending lever. Read off the value of the measuring
clock device and adjust the scale if necessary by turning the
knob.
5 mm- Device for strength value up to 60 Mpa
2,5 mm- Device for strength value over 60 Mpa
Cutting device with knife
1