Place Of Installation - Nevoox LF2030 Instruction Manual

Uv-c air purifier
Hide thumbs Also See for LF2030:
Table of Contents

Advertisement

Available languages

Available languages

2) Screw the base plate to the holes in the
bottom of the air purifier marked in the
picture.
Models LF2030-LF2040:
Four screws are required.
Models LF2050-LF2070:
Eight screws are required.

6. Place of installation

To make full use of the air purifier's perfor-
mance, the unit should be placed at a mini-
mum distance of 10-15cm from walls or similar.
This ensures that sufficient air can be sucked
in through the back of the unit.
If you use the air purifier, it is recommended
that you close the doors and windows to
achieve a better cleaning effect.
To prevent the appliance from wobbling or
tilting, ensure that the appliance is placed
on a level and non-slip surface.
7. Commissioning
7.1. Switch on and off
2
Press once to switch on,
press again to switch off.
7.2. Fan speed (Speed)
7.3. Child Lock
7.4. Filter Timer (Filter Reset)
After changing the filter, press the „FILTER
RESET" key for 3 seconds to reset the counter
to 1500 hours.
7.5. Off Timer
8
The fan speed
can be set in
four stages.
Briefly press the key to
lock all control keys.
Press for three seconds to
return all the control keys
to the unlock modus.
The maximum running
time of the filters is 1,500
hours. When the remaining
running time of the filters
is approx. 60 hours, the
display flashes and shows
„FILTER REMAINING TIME".
During this period the filter
must be replaced.
The unit can be switched
off in 12 steps (0-12 hours)
using the timer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lf2040Lf2050Lf2070Lf 2060

Table of Contents