Premio Computer System Manual page 96

Chapter 3
Run VGABIOS if S3 Resume
This item allows the system to initialize the VGA BIOS from S3 (Suspend to
RAM) sleep state. Setting options: Auto, Yes, No.
Power Management
This item is used to select the degree (or type) of power saving and is related
to these modes: Suspend Mode and HDD Power Down. There are three op-
tions for power management:
User Define Allows end users to configure each mode separately.
Min Saving Minimum Power Management. Suspend Mode = 1 Hour,
Max Saving Maximum Power Management. Suspend Mode = 1 Min,
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screen
V/H SYNC+Blank
DPMS
Video Off In Suspend
This setting determines whether the monitor will be turned off during suspend
mode. Setting options: Yes, No.
Suspend Type
This setting allows you to select the type of Suspend mode. Setting options:
Stop Grant (saves the state of the entire system to disk and then powers off
the system), PwrOn Suspend (the CPU and core system remain powered on in
a very low-power mode).
Modem Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
text is saved to main memory. The information stored in
memory will be used to restore the PC to the previous
state when an "wake up" event occurs.
and HDD Power Down = 15 Min.
and HDD Power Down = 1 Min.
This option only writes blanks to the video buffer.
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
Initial display power management signaling.
3-20