Remote Power On/Off Switch Connector: Jrms1; Power Saving Switch Connector: Jgs1 - Premio Computer System Manual

Hardware Setup

Remote Power On/Off Switch Connector: JRMS1

Connect to a 2-pin push button switch. When OFF, pressing the but-
ton can turn the system on. When ON, pressing the button once will make the
system enter the sleep/suspend state. If the button is pressed for more than
four seconds, the system will be turned off. To change the setup, go to the
BIOS Power Management Setup.
JRMS1

Power Saving Switch Connector: JGS1

Attach a power saving switch to this connector. Pressing the switch
once will have the system enter the sleep/suspend state. Press any key to wake
up the system.
JGS1
2-21