Installation, Operation and Maintenance Contents INTRODUCTION IMPORTANT INFORMATION EXTRACTION PERFORMANCE INSTALLATION SPECIFICATIONS MAINTENANCE OPERATING INSTRUCTIONS GENERAL ARRANGEMENT DRAWINGS & ILLUSTRATIONS Unpacking Remove all items from the packaging. Retain the packaging. If items are missing or damaged, please contact Westin for assistance.
The extractor must be isolated from the electrical supply exceeds 5m with three bends, then please consult with before carrying out any cleaning or maintenance Westin as to the suitability of this hood for your application. operations. • Rigid 150mm round ducting or 220 x 90 flat channel ducting Pay particular attention to fire risk when frying.
Westin to suit most installations. Unit Size (mm) Cut-out Size (mm) For roof or chimney duct terminations please contact Westin or (Width x Depth) (Width x Depth) seek alternative specialist advice. 1200 x 445...
Page 4
4.5. Fixing the Extractor in Position contacting Westin. When planning and undertaking your If you experience any further difficulties, please call Westin for installation, you must ensure the extractor can advice. be removed without disturbing fixed ducting or electrical installations, should future servicing be required.
Lamp replacement The long-life LED units are not designed for end user replacement. In the unlikely event of failure please call Westin. Page 4 Westin W2074 WSW BLOQUE PRO Built-in Unit O&M 20220323.docx...
If you are unsure how to operate your unit then please call the manufacturer for assistance. Page 5 Westin W2074 WSW BLOQUE PRO Built-in Unit O&M 20220323.docx...
BLOQUE PRO Built-in Unit Installation, Operating & Maintenance Instructions GENERAL ARRANGEMENT DRAWINGS & ILLUSTRATIONS BLOQUE PRO 1200 / 1500 LAYOUT INTERNAL MOTOR Page 6 Westin W2074 WSW BLOQUE PRO Built-in Unit O&M 20220323.docx...
Page 8
BLOQUE PRO Built-in Unit Installation, Operating & Maintenance Instructions BLOQUE PRO 1200 / 1500 EXPLODED VIEW INTERNAL MOTOR Page 7 Westin W2074 WSW BLOQUE PRO Built-in Unit O&M 20220323.docx...
Page 9
BLOQUE PRO Built-in Unit Installation, Operating & Maintenance Instructions BLOQUE PRO 1200 / 1500 INSTALLATION INTERNAL MOTOR Typical Installation with batons. PLAN VIEW Fixings Fixings Unit placed within typical cut-out detail. SIDE VIEW Fixings Fixings Page 8 Westin W2074 WSW BLOQUE PRO Built-in Unit O&M 20220323.docx...
Page 10
Remote Motor Cable Assembly Remote Motor Cable Assembly Aux terminal powers auxiliary PCB Orange/Yellow link wire is included (Orange/Purple link wire is included) in some motors. Page 9 Westin W2074 WSW BLOQUE PRO Built-in Unit O&M 20220323.docx...
Need help?
Do you have a question about the BLOQUE PRO 1200 and is the answer not in the manual?
Questions and answers