Related Manuals for Scell-it E-308NP
Summary of Contents for Scell-it E-308NP
- Page 1 OPERATION MANUAL PNEUMATIC RIVET NUTS SETTING TOOL E-308NP ESSENTIAL RANGE M3-M8 ALUMINIUM - STEEL - STAINLESS STEEL...
-
Page 2: Tool Specifications
M3 – M4 – M5 – M6 – M8 all materials and styles TOOL SPECIFICATIONS Air supply pressure: 0.5Mpa ~ 0.7Mpa Output traction power: 14,000 N ~ 19,600 N Stroke: 1 mm ~ 7 mm adjustable Net weight : 1.70 kgs E-308NP / User manual... - Page 3 (#63) again and meanwhile screw in the selected mandrel as shown, then release the sliding sleeve (#63): e) To screw on the knured cover (#15) and nose pedestal (#13) back to the tool, and locknut (#3), and anvil (#2): E-308NP / User manual...
- Page 4 To push the sleeve (#14) to the tool mandrel side, as shown : b) To adjust the tool stroke by turning the knured wheel appearing on tool as shown: The scales along with the stroke setting window are indications for stroke. E-308NP / User manual...
- Page 5 Meanwhile, through the air release window, the operator still can push the bottom at the back of the compressed spring pedestal (#27) to release the tool when necessary (refer to TOOL OPERATION section 3). Please note that the adjustor covering on default loosen and users should use any adhesive tape to tight. E-308NP / User manual...
-
Page 6: Tool Maintenance
To connect the tool with air supply, to pull the tool trigger (#53) 6 or 7 times, then loosen the screw (#17), let the extra air leaking out, then screw on the screw (#17) tight again: E-308NP / User manual... - Page 7 TOOL EXPLOSIVE ILLUSTRATION E-308NP / User manual...
-
Page 8: Warranty Conditions
FRANCE Tél.: +33(0) 320 329 818 Declares hereby that the following product : Manual pneumatic hydraulic rivet nuts setting tool type E-308NP Complies with the following relevant conditions : EC Machinery Directive 2006/42/EC Annex I If the machine is modified without our knowledge and consent, this EC Declaration of... - Page 9 CARACTERISTIQUES DE LA MACHINE Pression circuit d’air comprimé : 5 bar ~ 7 bar Force : 14 000 N ~ 19 600 N Course : 1 mm ~ 7 mm ajustable Poids net : 1,70 kg E-308NP / Mode d’emploi...
Need help?
Do you have a question about the E-308NP and is the answer not in the manual?
Questions and answers