Lamp Replacement Procedure - Barco R9841822 Installation Manual

3. LAMP REPLACEMENT PROCEDURE

3.1 Reset lamp runtime
3.1.1 Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
W
ARNING
technician.
How to reset the lamp runtime in the iDR600 ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 3-1)
7. Press ENTER
A dialog box is displayed (image 3-2)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 3-1
Image 3-2
R5976839 IDR600/SIM5+ LAMP KIT 27/04/2005
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
3. Lamp replacement procedure
5