Table of Contents
Advertisement
6<67(0 &21),*85$7,21
3.7.2
DISA Activation
The time before DISA is activated can now be changed. The time can be set from 02 seconds
to 99 seconds before the second dial tone is presented to the caller for entry of extension
numbers.
Note: If microAid (version 1.1.3) is used to re-program the exchange the distinctive ring style
settings will be changed back to the standard default cadence.
3.7.3
Release of tie lines
The time period when a tie line is released can be set by this command. This allows for longer
intervals between ringing cadences to be recognised without the line being dropped. The time
interval can be set from 02 seconds to 99 seconds. The interval should be set to 1½ times the
tie line cadence.
Note: If microAid (version 1.1.3) is used to re-program the exchange the distinctive ring style
settings will be changed back to the standard default cadence.
3.8
Pin Number
A PIN number is a four digit Personal Identification Number. This allows access to an outside
line or the PA system from an extension which does not have that facility. (Crew class
extensions do not normally have access.) A PIN number can only be assigned as an Engineer
facility. A Pin number is assigned to a Pin ID. Up to 255 PIN ID's are available with
corresponding PIN numbers ranging from 0000 to 9999.
If a PIN number system is in use then ALL access to external lines will need the use of a PIN
number.
A routine is available to change a PIN number if necessary, for example, for security reasons.
See the Engineering Functions table.
3.8.1
Printing PIN numbers
You can request a printout of PIN numbers. They are printed in blocks of thirty two. Dialling
74 followed by 1 will print the PIN ID's 001 to 032 with their corresponding PIN numbers; 74
followed by 2 will print the PIN ID's 033 to 064 with their corresponding PIN numbers and so
on. See the Engineering Functions table for the complete list.
3.9
Phone Reset Facility
Supervisors PIN number + 51
This is a housekeeping task which clears down all the extensions and returns to the
configurations you have set. For example if there is a 'Call forward' or a 'Call back on busy'
on any extension then these will be cleared.
20
PLFUR6ZLWFK 7HFKQLFDO 0DQXDO
Advertisement
Table of Contents
