Table of Contents
Advertisement
PLFUR6ZLWFK 7HFKQLFDO 0DQXDO
6<67(0 &21),*85$7,21
&KDSWHU System Configuration
3.1
General
The MicroSwitch is supplied from the factory with a range of facilities already configured.
The Crew and Officer class facilities are described in the MicroSwitch User Manual.
Facilities requiring Engineering access mode are discussed in this manual.
The default configuration can be modified to suit on-board requirements by using a program
called microAid. The microAid software is available on a floppy diskette and is described in a
separate handbook. Limited reconfiguration can be carried out using a security PIN number
which allows access to the MicroSwitch system via a DTMF telephone.
If you reconfigure the MicroSwitch exchange we recommend that you print a record of the
new configuration details and keep them with this manual for reference.
IMPORTANT
You are strongly advised to ensure the satisfactory operation of the
complete system as described in the installation checks before you
implement any modifications to the factory configuration.
13
Advertisement
Table of Contents
