Using Flash - Casio EXILIM EX-Z35 User Manual

Using Flash (Flash)
1.
In the REC mode, press [2] (
select the flash setting you want.
Each press of [2] (
the available flash settings.
• If "On" is selected for the Panel setting
(page 105), you can change the flash
setting by pressing [2] (
using [4] and [6] to select the setting,
and then pressing [SET].
Auto Flash
>
Flash Off
?
Flash On
<
Red Eye
¥
2.
Press the shutter button to shoot.
< indicates the flash will fire.
• For information about Flash Range, see page 140.
) cycles through
) once,
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Back lamp
Flashes orange while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
) to
[2] ( )
snapshot until the lamp stops flashing orange,
which indicates that charging is complete.
33
Flash
Snapshot Tutorial