Casio EXILIM EX-Z35 User Manual page 136

RETRY POWER
ON
SYSTEM ERROR
The card is
locked.
There are no files. There are no files in built-in memory or on the memory card.
There are no
printing images.
Set up DPOF.
This card is not
formatted.
This file cannot be
played.
This function
cannot be used.
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are currently no files specified for printing. Configure
the required DPOF settings (page 82).
The memory card loaded in the camera is not formatted.
Format the memory card (page 113).
The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
136
LOCK
Appendix