Advertisement
using power bank as the output voltage is not of standard 5V.
On the smartwatch screen, the charging process will be displayed,
showing the battery status. Once charged it, the full battery will be
displayed as full of charge.
It's not possible to set the time of the smartwatch without
synchronizing with the Smartphone, because the watch time always
show the same as Smartphone have. If you set the time on your
Smartphone, it will automatically sync to the smartwatch.
NOTE: The battery consumption of the smartwatch is higher when it
remains connected and synchronizing data with your smartphone.
Therefore, it's recommended keep it disconnected when you finish to
use between them.
Charging instructions
Connect the magnetic connector into the
charging position as shown in the figure
below, using smartphone charger 5V/1A.
www.vietapro.com
Advertisement
