Table Of Contents; Product Features & Specifications - Utilitech CZQTV5MLSCN Manual

TABLE OF CONTENTS

Product Features & Specifications.............................................................................................................. 2
Safety Information................................................................................................................................. 2 - 3
Installation Instructions ....................................................................................................................... 4 - 5
Operating Instructions ................................................................................................................................ 6
Care and Maintenance ............................................................................................................................... 7
Warranty .................................................................................................................................................... 7
PRODUCT FEATURES & SPECIFICATIONS
FEATURES
Top Mounted Control Panel
Power Indicator Light*
Safety Overheat Protection**
Stay cool body with dent-resistant end panels
Silent Operation
IMPORTANT SAFETY FEATURES
*POWER INDICATOR LIGHT:
The power indicator light, located near the control panel, lights whenever the heater is plugged in.
**AUTOMATIC OVERHEAT PROTECTION:
The heater is equipped with an automatic overheat protection device located inside the body of the heater. If the
heater grille is obstructed, or if the heater gets too hot for any reason, the automatic overheat protection device will
turn the heater off. To reset the heater, simply turn power off and unplug the heater for 10 minutes until it cools down
and you may plug in and restart the heater. Be sure that the heater is on a smooth level surface with no obstructions.
SAFETY INFORMATION
PLEASE READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE ATTEMPTING TO ASSEMBLE, OPERATE
OR INSTALL THE PRODUCT.
PRECAUTIONS:
This product is intended for indoor residential and office use only, not for industrial or other commercial application.
Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. This
heater must be plugged in to a 120V AC, 15 A (or larger) circuit. Do not plug anything additional into the same circuit.
If you have any questions whether your wiring is adequate, consult a qualified electrician. Risk of fire, overheating,
malfunction, property damage, injury or even death may result if not adhered to.
Use your heater only with a working smoke detector located in the vicinity of your heater.
While using your heater, you should follow the IMPORTANT INSTRUCTIONS listed below.
As part of those instructions, we have used the word "WARNING" to indicate the level of hazard.
WARNING indicates a hazard which, if not avoided, could result in injury or death.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following important instructions.
SPECIFICATIONS
Two Heat Settings:
II - High 1500 watts (5120 BTU)
I - Low 750 watts
120V A.C.
60Hz
12.5A
2