•
FILTER
The 0.2µ absolute
is vented into the vessel during cool-down and during dispensing. The filter is
automatically sterilized during sterilization.
•
PRESSURE GAUGE
A
PRESSURE GAUGE
monitor the system pressure during sterilization.
•
PRESSURE RELIEF VALVE (JACKET)
A
PRESSURE RELIEF VALVE
pressure build-up in the outer jacket during sterilization.
•
INOCULATION PORT
An
vessel contents after sterilization.
•
HARVEST VALVE ASSEMBLY
A
HARVEST VALVE ASSEMBLY
after sterilization. Agar or solution is dispensed through the
HARVEST VALVE ASSEMBLY
•
THERMOWELL
A
THERMOWELL
the temperature of the sterilization vessel.
•
TEMPERATURE PROBE
A
TEMPERATURE PROBE
vessel temperature to the control system and display.
New Brunswick Scientific Co., Inc.
FILTER
, located on the vessel top cover, is used to visually
is provided to introduce heat labile additives to the
INOCULATION PORT
is provided to accept a
prevents re-entry of water and microorganisms as air
, set to open at 45 PSIG, prevents excessive
is provided to drain the contents of the vessel
(see Figure 11).
TEMPERATURE PROBE
(
) is provided to sense and to relay the current
RTD
27
of the
SPOOL
that measures
User's Guide