Download Print this page
Hilti DD-WMS 100 Safety Sheet

Hilti DD-WMS 100 Safety Sheet

Water management system
Hide thumbs Also See for DD-WMS 100:

Advertisement

Quick Links

IMPORTANT - CONDUCT A RISK ASSESSMENT
Before you commence any work at your chosen work area, you should
undertake some preliminary hazard identification and risk control
precautions. Ideally more than one person should do this. This is
undertaken by:
1.
Physically inspecting the work site
2.
Reviewing the best way/job steps required to complete the task
3.
Reviewing the Safe Work Information supplied with the equipment
4.
Reviewing other reference documentation and expert advice.
The hazard identification and control process steps are defined as:
1.
Identify the Hazards (eg. 240V power drill use around wet areas)
2.
Assess the Risk (multi earth paths - possible electrocution)
3.
Select the Control Measure (e.g. dry the area; use an RCD; use a
cordless drill etc)
4.
Re-assess the Risk (risk of electrocution now negligible). This is
undertaken to ensure that the risk control measures adopted have not
introduced any new risks to the work area.
SAFETY INFORMATION
The user and any other persons in the vicinity must wear suitable
eye protection, a hard hat, ear protection, protective gloves, safety
footwear and breathing protection while the appliance is in use or while
maintenance work on it is being carried out.
Engage the wheel brakes so that the appliance stands securely. If the
wheel brakes are disengaged the appliance may run away out of control.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of a vacuum
cleaner can reduce dust-related hazards.
Before beginning work with the appliance, the operating personnel must
be informed about how to operate it correctly and about any hazards
associated with the materials it will be picking up and how these materials
can be disposed of safely.
Use of the appliance for cleaning down persons or animals is not
permissible.
Do not use the appliance for continuous, stationary operation in automatic
or semi-automatic systems.
Do not stand on top of the appliance (do not use it as a substitute for a
ladder). Do not use the appliance under water.
Do not use the appliance to pick up flammable or explosive dusts
(magnesium or aluminum dust etc.) or dusts that present a health hazard.
Do not use the appliance to pick up materials with a temperature of over
60 °C (e.g. glowing cigarettes, hot ash).
Do not use the appliance to pick up flammable, explosive or aggressive
liquids (coolants and lubricants, gasoline, solvents, acids (pH < 5), alkalies
(pH > 12.5), etc.).
Switch the appliance off immediately if foam or liquids escape from it.
Wear protective gloves when using the appliance to pick up hot materials
up to a temperature of 60 °C.
When working with mineral drilling slurry, wear protective clothing and
avoid skin contact with the slurry (pH > 9: caustic).
PERSONAL PROTECTION
EQUIPMENT (PPE)
RESPIRATORY
PROTECTIVE
PROTECTIVE
PROTECTION
GLOVES
BOOTS
WATER MANAGEMENT SYSTEM
SAFETY SHEET
(Hilti DD-WMS 100)
PLEASE READ THIS GUIDE CAREFULLY
BEFORE OPERATING THE EQUIPMENT
HELP AND SUPPORT
If the unit does not operate correctly or you are unhappy with its
performance, return it to Asset Construction Hire for an exchange,
or phone for assistance. Do not attempt repairs yourself.
Asset Construction Hire
Phone:1300 361 383 or email: office@assethire.com.au
OPERATION MANUAL
A PDF of the full Operation Manual is available at:
www.assethire.com.au/manuals-specs-safety-sheets/
and must be read before using the equipment.
BEFORE OPERATING THE EQUIPMENT:
Read this Safety Sheet and any other information provided with the
equipment, including instructions, decals and operation guidelines.
Check that you understand how and when the use the equipment,
and know how to operate it safely.
Ensure that it is only used according to the manufacturers and hirer's
instructions, and only for work that is compatable with its technical
limitations.
Operate in a clear work area free from nonessential persons, children,
animals or hazards.
Ensure that you have a secure footing and clear access and egress to
the work area while on the job.
Do not operate any equipment if you are tired or suffering any medical
condition, or if under the influence of drugs or alcohol which may
cause lethargy or dangers to yourself or others.
Do not use faulty equipment. If in doubt contact Asset Construction Hire.
Avoid contact with alkaline or acidic liquids. If contact accidentally occurs,
rinse with water. In the event of the liquid coming into contact with the
eyes, rinse the eyes with plenty of water and consult a doctor.
A Dust Class M appliance is suitable for picking up dry, non-flammable
dusts, liquids, wood chips and hazardous dusts with an exposure limit
value of 0.1 mg/m³. The appliance must be equipped with a suitable filter
corresponding to the hazard classification of the dusts to be picked up.
Never leave the appliance unattended.
Do not deactivate the filter cleaning system when picking up hazardous
dusts, especially when the appliance is used in conjunction with electric
tools that generate dust.
Protect the appliance from frost.
Clean the water level limiting device regularly with a brush, in accordance
with the instructions, and check it for signs of damage.
When fitting the top section of the appliance, take care to avoid pinching
your fingers or damaging the supply cord. This presents a risk of injury or
damage.
Check the appliance and its accessories for any damage. Guards, safety
devices and any slightly damaged parts must be checked carefully to
ensure that they function faultlessly and as intended. Check that moving
parts function faultlessly, without sticking, and that no parts are damaged.
In order to ensure faultless operation of the appliance, all parts must be
fitted correctly and must meet the necessary requirements.
Have the appliance serviced by a qualified repair person using only
genuine Hilti spare parts. The safety of the appliance can thus be
maintained.
Always unplug the supply cord from the power outlet when the appliance
is not in use (during breaks), before cleaning and maintenance and before
changing the filter or accessories. This preventive safety measure reduces
the risk of starting the appliance accidentally.
Never pull the appliance by the supply cord to a new working position. Do
not run the wheels of the appliance over the supply cord.
Do not transport the appliance by crane.
Close the hose inlet socket with the cap before transporting the appliance
and when it is not in use.

Advertisement

loading
Need help?

Need help?

Do you have a question about the DD-WMS 100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hilti DD-WMS 100

  • Page 1 • Have the appliance serviced by a qualified repair person using only 60 °C (e.g. glowing cigarettes, hot ash). genuine Hilti spare parts. The safety of the appliance can thus be maintained. • Do not use the appliance to pick up flammable, explosive or aggressive liquids (coolants and lubricants, gasoline, solvents, acids (pH <...
  • Page 2 Option: Water supply. Set the control switch to the Water supply position. diamond coring machines. 6.1 Switching the appliance on Use the DD-WMS 100 to pick up and collect drilling slurry, to recycle the water and to supply water to • Open the water valve on the diamond core drilling machine.