Table of Contents
Advertisement
Using Flash (Flash)
1.
In the REC mode, press [2] (
2.
Use [4] and [6] to select the flash setting
you want and then press [SET].
When the "R Panel" menu item (page 96) is
"Off" (so the Control Panel is not displayed),
pressing [2] (
available flash settings.
Auto Flash
>
Flash Off
?
Flash On
<
Red Eye
¥
Reduction
3.
Press the shutter button to shoot.
< indicates the flash will fire.
) will cycle through the
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Back lamp
Flashes orange while the flash is charging to indicate
that image recording is disabled.
2
N
• You will not be able to take another flash snapshot
until the lamp stops flashing orange, which indicates
that charging is complete.
26
) once.
[2] (
Flash
)
Snapshot Tutorial
Advertisement
Table of Contents
