Configuring Usb Protocol Settings; Selecting The Screen Aspect Ratio And Video Output System (Video Out) - Casio EXILIM EX-Z22 User Manual

Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Select this setting when connecting to a computer (pages 80, 89).
With this setting, the computer sees the camera as an external
Mass
storage device. Use this setting for normal transfer of images from
Storage
the camera to a computer (using the bundled Photo Loader with
HOT ALBUM application).
Select this setting when connecting to a printer that supports
PTP
PictBridge (page 72). This setting simplifies the transfer of image
(PictBridge)
data to the connected device.
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 Normal TV screen aspect ratio
16:9 Wide screen aspect ratio
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera's video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
103
Other Settings (Set Up)