Advertisement
T941AM8 A
M
LARM
ODULE
3 ADDRESSING
Select the proper address by setting address selector switch SW01. The address must not
be 00 nor the same as any other 900 unit address.
Figure 6. Addressing switch on the Alarm Module.
Note: When connected to the Central Portable Device Manager (CPDM), the
module address has to be in the range 01 to 0F.
For information about how to distribute alarms from the CPDM to the Alarm Module, see
Installation and Operation Manual, CPDM.
58/1531-ANF 901 43 Uen E1 2016-03-18
- I
G
NSTALLATION
UIDE
OFF
SW01
ON
1
8
6
Advertisement
