Advertisement
T941AM8 A
M
LARM
ODULE
8 INSTALLATION TEST
After the installation, a functional check is made.
If a malfunction occurs, check that the functional indicator (LED) on the unit shows a steady
light. If not proceed as follows.
Function indicator
Figure 13. Function indicator on the Alarm Module.
•
No light: No power, check power supply. Hardware fault, contact your dealer.
•
Slow blink (0.5 Hz): Program error. Restart the unit by switching the power off and
on.
•
Fast blink (0.8 Hz): Communication error. Check bus polarity and addressing of the
unit.
•
One blink every fourth second: Unit in test mode. Contact your dealer.
Activate an input and check that the handsets respond correctly. Repeat this for every input
that can generate alarms including handsets.
58/1531-ANF 901 43 Uen E1 2016-03-18
- I
G
NSTALLATION
UIDE
12
Advertisement
