Surround View Monitoring - Lucid Air Owner's Manual

When the system is canceled, the vehicle will
stop, emit an audible alert, and prompt the
driver to take control of the steering wheel
and brake pedal. If there is no response from
the driver after 20 seconds, the gear will
automatically shift into P (Park).
If Automatic Park Out cancels for any of the
aforementioned reasons and you wish to use
the system again, you must start over at the
beginning of the process.

Surround View Monitoring

WARNING: The Surround View
Monitoring system should not be used
as a replacement for looking into the
interior and exterior mirrors or looking
over your shoulder when operating and
parking the vehicle. Always inspect your
surroundings with your own eyes.
The Surround View Monitoring system uses
the exterior cameras to display the immediate
vehicle surroundings in real time. This system
assists you in situations such as parking or at
exits with reduced visibility.
Note: Surround View Monitoring is only
available when the vehicle's speed is below
9 mph (15 km/h).
Using Surround View Monitoring
To activate the system, press
Panel, then select SURROUND VIEW.
When the gear is in R (Reverse), Surround View
Monitoring will activate automatically on the
Pilot Panel.
Press at any time to close the screen.
Note: When Park Distance Warning is activated,
visual indicators for object distance will be
displayed. See Park Distance
To manipulate the view, use any of the following
screen gestures:
Use one finger to press and drag, panning
-
the screen to move the camera angle in
any direction.
Double-tap the screen to zoom and center
-
on the image. Double-tap again to zoom
out.
Advanced Driver Assistance Systems (ADAS)
on the Pilot
Warning.
Pinch inward with two fingers on the
-
screen to zoom out the camera angle.
Reverse the gesture to zoom in.
Use all five fingers to pinch in on the
-
screen, and the system will return to the
default top-down view.
In the default top-down view, press a
camera button to switch to a 3D view from that
camera angle.
Press a camera button on the front or rear
of the displayed vehicle to switch to the camera
view from the front or rear bumper.
In 3D view, press the
the top-down view.
Surround View Monitoring limitations
In addition to the limitations of Advanced
Driver Assistance components (see
Limitations), the Surrounding View Monitoring
system may not function correctly in these
situations:
The trunk, the hood, or a door is not
-
closed
The side mirrors are folded in
-
The trunk or hood is open
-
button to switch to
ADAS
115