Faber AFENTA Quick Start Manual page 12

E
C
A
B D
(A) switch ON/OFF (B) Digital thermostat display (C) Steam knob
(D) Steam wand (E) Water tank compartment
STEAM WAND OPERATING INSTRUCTIONS
1. Turn On switch of the boiler Steam (A) wait that the digital display (B)
reaches a temperature of 120/130 ° (factory setting parameters).
2. Insert the container with the liquid to be heated and press the steam
dispenser button (button B – Fig. 2) until the desired temperature has
been reached, then press the button again to stop dispensing steam.
3. Clean the steam wand with a damp cloth after use.
NOTE
Before performing any operations that involve dispensing steam, ensure that
the steam wand is pointed in the direction of the drip tray.
Warning: Danger of scalding. Operate the steam wand using the knob.
Do not point the wand at people and/or animals.
12