Table of Contents
Advertisement
Advanced features
Getting the most from your TV
Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected to an active
broadband connection.
• Connect your TV to your modem/router via an Ethernet
cable. There is a LAN port at the rear (back) of your TV.
1
2
3
1. Broadband ISP connection
2. LAN (Ethernet) cable
3. LAN input on the rear side of the TV
To configure wired settings refer to the Network
section in the Settings menu.
• You might be able to connect your TV to your LAN depending
on your network's configuration. In such a case, use an
Ethernet cable to connect your TV directly to the network
wall outlet.
1
2
1. Network wall socket
2. LAN input on the rear side of the TV
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired Device,
Wireless Device or Disabled, in accordance with the active
connection to the TV set. Select this as Wired Device if you
are connecting via an Ethernet cable.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
Internet Speed Test
Highlight Internet Speed Test and press the OK button. TV
will check the internet connection bandwidth and display
the result when complete.
Advanced Settings
Highlight Advanced Settings and press the OK button. On
the next screen you can change the IP and DNS settings
of the TV. Highlight the desired one and press Left or Right
button to change the setting from Automatic to Manual.
Now you can enter the Manual IP and / or Manual DNS
values. Select the related item in the drop down menu
and enter the new values using the numeric buttons of
the remote. Highlight Save and press the OK button to
save settings when complete.
Wireless Connectivity
To Connect to a Wireless Network
The TV cannot connect to networks with a hidden SSID.
To make your modem's SSID visible, you should change
your SSID settings via the modem's software.
1. Broadband ISP connection
A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous
2.4 and 5 GHz bands is designed to increase bandwidth.
These are optimised for smoother and faster HD video
streaming, file transfers and wireless gaming.
• The frequency and channel differ depending on the area.
• The transmission speed differs depending on the distance
and number of obstructions between the transmission
products, the configuration of these products, the radio wave
conditions, the line traffic and the products that you use. The
transmission may also be cut off or may get disconnected
depending on the radio wave conditions, DECT phones or
any other WLAN 11b appliances. The standard values of the
transmission speed are the theoretical maximum values for
the wireless standards. They are not the actual speeds of data
transmission.
Advanced features
1
35
Advertisement
Table of Contents
