Casio EXILIM EX-Z1 User Manual page 99

4.
Turn off the camera and
then use the USB cable that
comes with the camera to
connect it to your
Macintosh.
• The camera does not draw
power over the USB cable.
Make sure the camera's
battery is sufficiently charged
before connecting.
• Make sure that you insert the
cable connector into the
USB/AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result in
poor communication or
malfunction.
• Note that even while the
connector is fully inserted, you still will be able to see
the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer's USB port.
5.
Turn on the camera.
The camera's back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera's built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
USB port
Large connector
Making sure that the 2 mark on the camera is
aligned with the 8 mark of the USB cable
connector, connect the cable to the camera.
99
USB cable
USB/AV port
Small connector
Using the Camera with a Computer