Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6]
[SET]
2.
Use [8] and [2] to select the setting you want to change.
Image size/Quality* (pages 32, 67)
1
Flash (page 35)
2
Face detection (page 37)
3
Anti shake (page 39)
4
ISO sensitivity (page 40)
5
* Image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 55).
• The Control Panel cannot be displayed while a For YouTube, or Voice Recording
Operation is in progress.
Available settings
White balance (page 40)
6
EV shift (page 42)
7
easy Mode (page 43)
8
Date/Time (page 45)
9
31
Control Panel
1
2
3
4
5
6
7
8
9
Snapshot Tutorial