Hunter Acela 51674 Installation Manual page 10

Installation - Final
Turn Power ON, breaker and main switch.
Operation – Remote
To access the battery compartment, remove the
small Phillips head screw (J) that secures the battery
door to the transmitter assembly. The battery should
be installed with the positive (+) side up. Replace
with a CR2032 battery when necessary.
The remote control is already paired for use. For your convenience a remote function card is packed in with your remote.
10
ON
Key Press
+ Quick Press
+ Long Press
+ Quick Press
+ Quick Press
+ Quick Press
Battery Door
Long Press
Long Press
Phillips Screw (J)
Long Press
Long Press
Long Press
Function
Light On/Off
Light Dimming
Fan On/Off
Raise Fan Speed
Lower Fan Speed
+
Fan Updraft
+
Fan Downdraft
Dimming Mode
+
On/Off
+
Enable Beep
+
Disable Beep
NOTICE
• Always purchase the
correct size and grade of
battery most suitable for
the intended use.
• Replace all batteries of a
set at the same time.
• Clean the battery contacts
and also those of the
device prior to battery
installation.
• Ensure the batteries are
installed correctly with
regard to polarity (+ and -).
• Remove batteries from
equipment which is not to
be used for an extended
period of time.
• Remove used batteries
promptly.