Regulatory Compliance; Notice For Fcc - monolith M8250X User Manual

1 Watt Power Bandwidth
Damping Factor
Crosstalk
DC Output Offset
Remote Trigger Voltage
Input Power
Dimensions (with binding posts) (HxWxD)
Weight

REGULATORY COMPLIANCE

Notice for FCC

This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the equipment
no longer complying with FCC requirements for Class B digital devices. In that event, your
right to use the equipment may be limited by FCC regulations, and you may be required to
correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
+0, -3dB from 10Hz ~ 50kHz
Greater than 400 from 20Hz ~ 400Hz
Better than -70dB, 200Hz ~ 20kHz
Less than ±20mV
3.3 ~ 24.0 VDC, 5mA
120 VAC, 60Hz
5.25" (3RU) x 17.1" x 12.5"
28.2 lbs. (12.8 kg)
16