Specifications - monolith M8250X User Manual

SPECIFICATIONS

P/N
Model
Inputs
Input Impedance
Gain
Frequency Response at Rated Output
Signal-to-Noise Ratio (A-Weighted)
FTC Full Bandwidth (20Hz ~ 20kHz) Output
Power
Input Sensitivity for Full Rated Power
Total Harmonic Distortion + Noise (THD+N)
@ 20Hz ~ 20kHz
Total Harmonic Distortion + Noise (THD+N)
@ 1kHz
FTC Full Bandwidth (20Hz ~ 20kHz) Output
Power
Input Sensitivity for Full Rated Power
Total Harmonic Distortion + Noise (THD+N)
@ 20Hz ~ 20kHz
42564
M8250X
8x balanced XLR
47kΩ
25.7dB
20Hz ~ 20kHz ±0.5dB
Greater than 115dB below rated FTS Full
Bandwidth Power
Measurements into 8-Ohm Loads
200 watts (all channels driven)
2.07 volts
Less than 0.05% (20Hz ~ 5kHz)
Less than 0.5% (5kHz ~ 20kHz)
< 0.01% at Rated Power
Measurements into 4-Ohm Loads
400 watts (4 channels driven)
2.07 volts
Less than 0.1% (20Hz ~ 5kHz)
Less than 0.5% (5kHz ~ 20kHz)
13