Haier HCR7918EIMP User Manual page 29

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
GB
CAUTION!
It is normal for milky or cloudy water to be dispensed after replacing the water filter.
This air in the water will clear eventually and is safe to drink.
The first ice and water dispensed may include particles or odour from the water sup-
ply line or the water tank.
If discolored ice is dispensed, check the water tank and the water supply for a pos-
sible source. Do not use the ice or water until the problem is corrected.
Do not touch the ice outlet or the automatic icemaker with your hand or a tool.
Dispense ice into a glass before filling it with water or other beverages. Splashing will
occur if ice is dispensed into a glass that already contains liquid.
Never use a glass that is exceptionally narrow or deep. Ice may jam in the ice pas-
sage, affecting the performance of the appliance.
Keep the glass at a proper distance from the ice outlet. A glass held too close to the
outlet may prevent ice from dispensing.
Dispose of the ice inside the ice bin if you go on vacation or if an extended power
outage occurs. Water from melting ice may drop from the dispenser onto the floor.
In-door icemaker
The automatic icemaker can automatically make 100-190 cubes, within a 24-hour
period if conditions are favorable. This amount may vary according to the environment
(ambient temperature around the appliance, frequency of the door being opened,
amount of food stored in the appliance, etc.).
(1) Auto Shutoff (feeler arm)
Removing/Refitting the ice storage bin
The ice dispensing chute may become blocked with frost if only crushed ice is used. Re-
move the frost that accumulates by removing the ice bin and clearing the passage with a
rubber spatula. Dispensing cubed ice periodically can also help prevent frost buildup.
Use
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcr7918eimbHcr7918eimp(uk)Hcr7918enmp

Table of Contents