Spdif Setup; Dolby Digital Setup; 3D Processing - Philips DVD Micro Theatre MCD759D User Manual

System Menu Options
FRONT SPEAKER
Adjusts the volume levels for front speakers.
Options include "LARGE" and "SMALL".
CENTER SPEAKER
Adjusts the volume level for the center speaker.
Options include "LARGE", "SMALL" and "OFF".
Note:
– This option is available only when you select
"5.1CH" under "DOWNMIX".
REAR SPEAKER
Adjusts the volume levels for rear speakers.
Options include Options include "LARGE",
"SMALL" and "OFF".
Note:
– This option is available only when you select
"5.1CH" under "DOWNMIX".
SUBWOOFER
Selects ON/OFF for the subwoofer.
TEST SPEAKER
The test tone will be automatically generated.
Note:
– This option is available only when you select
"5.1CH" under "DOWNMIX" and the disc tray is
open.
DIALOG
Adjusts the dialog level up or down so that you
can hear the dialog more clearly during playback.

SPDIF SETUP

The options included in SPDIF (Sony/Phillips
Digital Interface Format) SETUP PAGE are:
"OFF", "SPDIF/RAW" and "SPDIF/PCM".
➜
OFF: Turns off the SPDIF output.
➜
SPDIF/RAW: If you have connected your
DIGITAL OUT (COAXIAL or OPTICAL) to a
multi-channel decoder/receiver.
➜
SPDIF/PCM: Only if your receiver is not
capable of decoding multi-channel audio.
32
The option included in DIGITAL AUDIO SETUP
is: "DUAL MONO".
DUAL MONO
Select the setting that matches the number of
speakers you have connected.
➜
signals to Left speaker and Right mono sound
will send output signals to Right speaker.
➜
output signals to Left speaker and Right speaker.
➜
output signals to Left speaker and Right speaker.
The options included in 3D PROCESSING PAGE
are: "PRO LOGIC II" and "REVERB MODE".
PRO LOGIC II
The options included in PRO LOGIC II CONFIG
page are: "PRO LOGIC II", "MODE",
W W
"PANORAMA", "DIMENSION" and "CENTER
WIDTH".

DOLBY DIGITAL SETUP

STEREO: Left mono sound will send output
L-MONO: Left mono sound will send
R-MONO: Right mono sound will send

3D PROCESSING