Step 3: Connecting Speakers And Subwoofer; Step 4: Connecting The Control Cable; Step 5: Connecting Tv - Philips DVD Micro Theatre MCD759D User Manual

Step 3: Connecting speakers
and subwoofer
1
Connect the terminal marked CONNECT TO
SUBWOOFER on the rear of the amplifier to
CONNECT TO MAIN SET on the rear of
the subwoofer with the supplied DIN cable by
matching the pins.
2
Connect the center and front speakers to the
corresponding terminals on the rear of the
amplifier by matching the colors.
A
Connection to terminals on the
speakers and subwoofer
2
Connect the rear speakers to the corresponding
terminals on the rear of the subwoofer by
matching the colors.
Note:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
●
B
1
Connections
Step 4: Connecting the control
cable
Connect the serial port marked "CONTROL
CABLE" at the rear of the DVD player to the
same port at the rear of the power amplifier
with the supplied flat control cable.

Step 5: Connecting TV

IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV.
– Connect the DVD system directly to
the TV.
Using Composite Video jack
Option 1
2
1
Use the composite video connectors (yellow) of
the supplied audio and composite video cables
(2-in1) to connect the DVD system's VIDEO
OUT jack to the video input jack (or labeled as
A/ V In, CVBS, Composite or Baseband) on the
TV.
11