Table of Contents
Advertisement
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
CPU/System Temperature
Displays current CPU/system temperature.
CPU/System/Power Fan Speed
Displays current CPU/system/power fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
CPU/System/Power Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
CPU Fan Speed Control
Silent
Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed under the Slope PWM item.
Disabled
Allows the fan to run at full speeds.
Slope PWM
to Manual. Options are: 0.75 PWM value /
1st/2nd System Fan Speed Control
Normal
Allows the fan to run at different speeds according to the system temperature. You can
Silent
Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed under the Slope PWM item.
Disabled
Allows the fan to run at full speeds.
Slope PWM
Control is set to Manual. Options are: 0.75 PWM value /
C/140
F, 70
C/158
o
o
o
C ~ 2.50 PWM value /
C.
o
o
C ~ 2.50 PWM value /
o
- 20 -
F, 80
C/176
F, 90
C/194
o
o
o
o
o
CPU Fan Speed Control is set
1st/2nd System Fan Speed
C.
o
F.
Hide quick links:
Advertisement
Table of Contents
