Toshiba RD-XS24SB Service Manual page 63

Before recording
Please be sure to read this section to get ready for your recording.
Initializing a disc
Initialize a new DVD disc before using on this
recorder.
(Do not initialize a DVD-R if you use it in Video
mode.)
Disc type and initialization
HDD
DVD-RAM
DVD-RW VR mode
Video mode
DVD-R
VR mode
Video mode
*1 The HDD which has become unoperatable because
of its troubles may be recovered by initializing.
*2 There are the following 2 ways in DVD-RAM
initializing.
• Logical format: Normally use this method.
• Physical format: Use this method if a disc cannot
be recovered by the logical
format. (There is no guarantee
that all such discs can be
recovered.)
*3
Re-initializing is not possible to DVD-R.
*1
No need
Required *2
Required
Required
*3
Required
No need
Initializing a disc (Logical format)
1) Load a disc.
2) Press MENU.
3) Press / to select "Initialize DVD", then press
ENTER.
Timer recording
Select this menu when you want
to initialize a DVD.
Watch programme
Edit programme
Dubbing
Initialize DVD
Other settings
4) Select the recording mode and input the disc
data if necessary.
DVD-RAM
DVD format
Can be changed.
Edit
Disc Number 0 0 1 –
Edit
Disc Name
Can be changed.
Edit
DVD mode VR mode
Unformat
Fixed to "VR mode".
Start Cancel
DVD-RW
DVD format
Cannot be changed.
Edit
Disc Number – – – –
Disc Name Edit
Can be changed.
DVD mode Video mode Edit
Unformat
Select "Video mode"
Start Cancel
or "VR mode".
DVD-R
DVD format
Can be changed.
Disc Number 0 0 1 – Edit
Disc Name Edit
Can be changed.
Edit
DVD mode VR mode
Unformat
Fixed to "VR mode".
Start Cancel
Numbering a disc
The recorder automatically number discs when
initializing. However, you can assign a desired
number (using 3 digits) and designate sides A and
B on a double-sided disc.
(1) Press the / buttons to select "Edit" of "Disc
Number" then press the ENTER button.
(2) Press the / / /
(3) Press the ENTER button.
Operating Instructions
Menu
Select Set TV
EXIT
buttons to enter digits.
12-13