Table of Contents
Advertisement
Available languages
Available languages
EN
Attaching the precision trimmer comb
No.
Level
1
1
2
2
3
3
No.
Level
1
1
2
2
3
3
4
4
Operating instructions
To thin and taper the beard/moustache
● Attach a guide comb to full size trimmer. If you are trimmer for the first time start with the maximum trimming length setting.
● Turn the unit on.
● Place the flat top of the trimmer comb against the skin.
● Slowly slide the personal groomer through the hair. Repeat from different directions as necessary.
● If hair builds up in the trimmer comb during the trimming process, switch the unit off, pull off the comb and brush/rinse off.
Trimmer types and uses
● To define the beard/moustache line use the precision Trimmer Blade
● To Trim the edges of sideburns use the precision Trimmer Blade
● To shave around your beard/moustache use the micro shaver trimmer
NOTE: The micro shaver was designed to shave the detail areas around your beard/moustache/sideburns. It was not designed to shave the entire face.
Use your free hand to stretch your skin.
● To remove hair from nose and ear use the nose trimmer attachment
Note: Gently move the groomer in and out of the nostril or ear and at the same time rotate.
Avoid inserting the cutting unit more than 6mm into your nostril or ear.
● To remove hair from eyebrows attach the design trimmer attachment.
● Attach body trimmer attachment to trim the body hair in the efficient way.
Attaching and removing the trimmer comb attachment
NOTE: Always ensure the personal groomer is switched off before changing any attachments.
Tips for best results
● Beard, moustache and sideburn hairs should be dry.
● Avoid using lotions before using your personal groomer.
● Remove trimmer comb attachment if you are: defining hairline edges such as sideburns, trimming the nape of your neck, trimming your beard line on front
of neck.
Maintenance
How to clean the appliance
● When cleaning the appliance, just separate the appliance, as the picture shows. Then use the cleaning brush, clear the dust by cleaning the inside parts
(Fig. 15-16).
After each use
1. Turn the personal groomer off.
2. Gently brush the remaining hairs away/rinse under warm water from the guide comb and trimmer blade.
Cleaning cautions
● Only the guide comb attachment and trimmer blade may be removed from the product for cleaning.
● Cleaning should only be done with a soft brush, such as the brush supplied with the product.
● Only use the light-grade oil supplied or sewing machine oil on the blades.
● Do not use harsh or corrosive cleaners on the units or their blades.
● Do not submerge in water as damage will occur.
Storage
● Always store this appliance and cord in a moisture-free area. Do not store it in temperatures exceeding 140 F (60°C).
● Do not wrap the cord of the charging adaptor around the appliance.
Environmental protection
● Do not dispose the trimmer in household waste at the end of its useful life.
● Disposal can take place at our service centres or appropriate collection sites.
By doing this, you help to preserve the environment.
CAUTION: Do not put in fire or mutilate your battery packs they may burst or release toxic materials.
7
● Match the precision trimmer positioning comb from up to down till lock
Length (mm)
with heads parts (Fig. 13).
2.8
● Choose between 4 levels positions for precision trimmer positioning comb
from up and down (Fig.14).
5.8
● Put the body trimmer positioning comb with 3 levels attachment then by
9.8
sliding downwards, as picture shows (Fig. 11)
● Remove out of the body trimmer positioning comb upwards, as the picture
Length (mm)
shows (Fig. 12).
4
4.5
5
5.5
WWW.BORMANNTOOLS.COM
Advertisement
Table of Contents
