Table of Contents
Advertisement
Available languages
Available languages
EN
Use this appliance only for its intended use as described in this manual.
Do not use this product if it is not working correctly, if it has been dropped or damaged, or dropped into water.
Safety Instructions
WARNING-TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY:
● The appliance should never be left unattended when plugged into a power outlet.
● Keep the power plug and cord away from heated surfaces.
● Make sure the power plug and cord do not get wet.
● Do not plug or unplug the product with wet hands.
● Do not use the product with a damaged cord. A replacement can be obtained via our Service Centres.
● Charge, use and store the product at a temperature between 15°C and 35°C.
● Always unplug from the mains when cleaning.
● Only use the parts supplied with the appliance.
● Keep this product out of reach of children. The use of this appliance by persons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge can give cause to hazards. Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.
Description of main parts (Fig. A)
#
Part
1
Full size trimmer
2
Design trimmer
3
Precision trimmer
4
Nose trimmer
5
Micro shaver
6
Body trimmer
7
5 Guide combs
● a-d: for full size trimmer and precision trimmer
● e: for body trimmer
● f: for precision trimmer
8
On/Off Switch
9
Charging indicator light
10
USB Cable
11
Stand base
12
Lubricating oil
13
Cleaning brush
Getting Started
Charging
● Before using your appliance for the first time, charge it for 8 hours.
● Ensure the appliance is switched off before charging it.
● Connect the charging adaptor to the product and then to the mains socket (Fig. 18). The charging indicator will light up (Fig. 17).
● Your personal groomer cannot be overcharged. However, if the product is not going to be used for an extended period time (2-3 months), unplug it from
the mains and store it in a safe place. Fully recharge the appliance when you would like to use it again.
● To preserve the life of your batteries, let them run out every six months then recharge for 14-16 hours.
How to attach the combs to the appliance
● When changing the parts, first use your finger to connect the part in the right position, put the heads parts directing to the body align with the lock and
press the parts (Fig. 3-4).
● Remove out the heads parts as picture (Fig. 1-2).
● Match the positioning comb from front to back till lock with heads parts (Fig. 5-6).
● There are four positioning combs with four levels as below.
Attaching the positioning comb
No.
Level
1
1
2
2
3
3
4
4
6
Technical Data
Battery type:
Battery autonomy:
Input:
Output:
Waterproof level:
* The manufacturer reserves the right to make minor changes to product design and technical specifications
without prior notice unless these changes significantly affect the performance and safety of the products. The
parts described / illustrated in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer's product line with similar features and may not be included in the product you just
acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent
purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or
replacement work, including maintenance and special adjustments, must only be carried out by technicians of
the authorized service department of the manufacturer.
Length (mm)
● Remove out the positioning combs from back to front as picture (Fig.7-8).
3
● Press the two sides of the micro shaver attachment and remove out from
the body (Fig.9).
6
● Press the two sides of the micro shaver attachment and insert to the body
9
(Fig.10).
12
WWW.BORMANNTOOLS.COM
600mAh 3.7V, fast charge (1h)
≈ 120 minutes
USB
DC: 5V 1A
IPX4
Advertisement
Table of Contents
