Connect and charge
MIX has a built-in battery that can be charged
through the USB port of a computer.
Connect MIX to a computer
1
Slide out the integrated USB plug
MIX.
2
Connect the USB plug to a spare USB
port on your computer.
3
Turn on your computer.
MIX charges.
»
Note
•
For first-time use, allow MIX to charge for 3
hours.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
When you connect the MIX to the PC for the
first time, a pop-up window appears:
1
Select Philips Device Manager.
2
Follow the on-screen instructions to
complete the installation of the software.
Note
•
The installation requires you to agree to the
license terms.
If the pop-up window is not displayed
automatically:
1
Select My Computer (Windows XP /
Windows 2000) / Computer (Windows
Vista / Windows 7).
2
Right click on the Philips GoGear MIX
icon.
3
Select Install Philips Device Manager.
4
Follow the on-screen instructions to
complete the installation of the software.
EN
8
Note
•
The installation requires you to agree to the
license terms.
Battery level indication
The display indicates the approximate levels of
of
the battery status as follows:
100%
»
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
Tip
•
You can conserve battery power and increase
the play time of MIX if you ensure that the
shortest timer setting is selected. (To check/
adjust the timer settings, go to
Settings] > [Screen off timer].)
Software loaded on the MIX
MIX comes with the following software:
•
Philips Device Manager (helps you get
firmware updates for MIX)
Files loaded on the MIX
The following files are loaded on MIX:
•
User manual
75%
50%
25%
A flashing battery screen indicates
that the battery is low. The player
saves all settings and switches off
within 60 seconds.
0%
> [Display