Certa CT3IN1JVCPA User Manual

Certa CT3IN1JVCPA User Manual

Car jumpstarter, vacuum & powerbank

Advertisement

Quick Links

10,000mAh CAR JUMPSTARTER,
VACUUM & POWERBANK
CT3IN1JVCPA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CT3IN1JVCPA and is the answer not in the manual?

Questions and answers

Summary of Contents for Certa CT3IN1JVCPA

  • Page 1 10,000mAh CAR JUMPSTARTER, VACUUM & POWERBANK CT3IN1JVCPA...
  • Page 3: Safety And Warnings

    SAFETY & WARNINGS • Do not use with any other smart clamps other than the one supplied with this product. • If the jumper cables, cords or product shows any sign of damage, cease use immediately and contact help.Kogan.com for support. •...
  • Page 4 COMPONENTS Jump Starter Smart Clamps USB-C Cable Crevice Tool Brush Tool User Manual...
  • Page 5 OVERVIEW Charging port Battery indicator Power button Vacuum indicator USB output Smart clamp input Filter (inside) Protective cap...
  • Page 6 Smart Clamps Force start button Smart clamp plug Red jumper cable (+) Black jumper cable (-)
  • Page 7: Operation

    OPERATION Charging the Jump Starter Insert the supplied USB-C cable into the charging port on the jump starter. Plug the USB-C cable into a 5V/2A power adapter (mobile phone charger). It will take approximately 5-6 hours to fully charge. Note: It is recommended to fully charge the jump starter once every 3-6 months. (Power adapter is not included) Charging Your Devices (Power bank mode) The jump starter can be used to charge your portable electronic devices, such as phones,...
  • Page 8 Using the Vacuum Cleaner Remove the protective cap. Press the power button to turn on the vacuum cleaner. Swap between the brush and crevice tool as needed.
  • Page 9 Connecting to Vehicle Battery Ensure that battery level is above 50% before attempting to jump start your car. (press and hold the power button for 3 seconds, the battery indicator will display the current battery level). Insert the smart clamp plug into the jump starter. The green and red indicators will alternately flash.
  • Page 10: Cleaning And Care

    CLEANING & CARE • Do not leave this product in direct sunlight or hot environments for extended periods of time. The operating temperature is -20~60˚C. • Do not use any chemicals or detergents to clean this product. Wipe with a soft, slightly damp cloth.
  • Page 11 Vacuum Cleaner Indicator Cause Solution Solid green Vacuum cleaner is working normally. indicator. Low battery. Recharge the battery. Remove foreign object and restart the vacuum. Red indicator Foreign object stuck in the vacuum If the indicator flashes red flashes 3 times cleaner.
  • Page 12: Specifications

    SPECIFICATIONS Suction power ≥ 4000PA Noise level ≤ 75db USB output 5V 2.1A USB-C input 5V 2A Short circuit protection Over-discharge protection ≤ 13V ± 0.3V Over-temperature protection > 65˚C ± 5˚C Reverse polarity protection Reverse charging protection ≥ 12.6V ± 0.3V Dimensions 272 x 65mm...
  • Page 13 NOTES...
  • Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...

Table of Contents