Advertisement
Quick Links
Advertisement
Related Manuals for Certa CTJMPST13WA
Summary of Contents for Certa CTJMPST13WA
- Page 1 13000MAH WATER RESISTANT PORTABLE JUMP STARTER WITH WIRELESS CHARGER CTJMPST13WA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS • Use only the included battery clamp to start the car. • Do not use this unit if any part of the cable, clamp or cord is damaged. • Never connect both clamps together when the product is turned ON. •... - Page 4 OVERVIEW Press the button to charge your devices. On/Off button Press the button to see the remaining capacity. (multifunctional) Long press the button to turn the flashlight on or off. Displays: Remaining power percentage. LED display screen Charge and discharge status. Wireless charging status.
-
Page 5: Operation
OPERATION Charging the jump starter Connect the product to a suitable wall adapter via the USB-C cable. Short press the On/Off button to turn on the product. While charging the jump starter, the LED display screen will show the current battery power percentage. Once it is fully charged, the LED display screen will show 100%. - Page 6 Wirelessly charging devices Press the power button once to enable the wireless charging function. Place the device on top of the wireless charging icon to start. You may need to adjust the orientation of the device on the wireless charging pad for optimal results.
- Page 7 Jump start your car Note: This product is for 12V cars only (up to 7.0L petrol or 5.0L diesel engine). Always ensure that the battery level is above 50% before you use it to jump start your car. Step 1: Insert the plug of the smart battery clamp completely into the jump starter. If the green and red indicators on the battery clamp are flashing alternately, you are safe to move on to the next step.
- Page 8 Step 2: Connect the red clamp to the positive terminal (+) of the car battery and connect the black clamp to the negative terminal (-) of the car battery. If the green and red indicators on the battery clamp are flashing alternately, you are safe to move on to the next step. However, if the red indicator light is on: •...
- Page 9 Step 3b (optional): Force start function. • Make sure that the clamps are connected to the correct polarity battery terminal. • Hold the force start button for 3 seconds to enable the force start function. • When the indicator light of the smart clamp is solid green, the vehicle will need to be started within 30s.
-
Page 10: Care And Maintenance
CARE & MAINTENANCE • Never use the product to start a bulging or damaged car battery. • Store the product in a shaded, well-ventilated area. • Handle the product with care. Avoid dropping or striking the product heavily and repeatedly. •... - Page 11 How is the product turned off? This product will power off automatically when no load is detected or when charging is complete. How long does it take to fully charge the jump starter? Approximately 7 hours through the Micro USB or Type C input ports. How many times can this product start the vehicle with full capacity? Approximately 15 times.
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the CTJMPST13WA and is the answer not in the manual?
Questions and answers