9 Radio
Auto-tune to FM radio
stations
The auto-tune feature searches for FM radio
stations and then stores the frequencies of the
first 20 stations under preset numbers.
Here is how to auto-tune to FM radio stations:
1
Set the mode selector to position .
2
Connect the earphones with the wire
fully extended.
»
The earphone wire acts as antenna.
3
Navigate the main menu to select
[Radio].
4
Navigate the preset menu, and then press
to select an unassigned preset.
5
Select [Yes] to confirm the screen
prompt.
CAM searches the FM frequency
»
band for radio signals of broadcasting
stations.
CAM stores the first 20 radio signals
»
under the preset numbers.
CAM displays the list of presets*.
»
Note
•
*In areas of low radio signal reception, CAM
displays the manual tuning screen so you can
manually tune to a radio station.
Listen to FM radio
1
Set the mode selector to position .
2
Connect the earphones with the wire
fully extended.
The earphone wire acts as antenna.
»
3
Navigate the main menu to select
[Radio].
4
Navigate the list to select a preset.
•
Press
to toggle between "sound
off" and "sound on".
Tip
•
In radio mode, press
options.
Manually tune to FM radio
stations
In areas of low radio signal reception, CAM
displays the manual tuning screen so you can
manually tune to a radio station.
Here is how to manually tune to FM radio
stations:
1
While in the manual tuning screen, press
/
to slowly scan the FM frequency
band.
2
Press and hold
FM frequency band.
Tip
•
Press
to view more options.
to view more radio
/
to quickly scan the
EN
21