EE 5GEE User Manual page 12

Installation
2.2.2 Connecting using WPS (WiFi Protected Setup)
Step 1: Press the WPS button on the front of the 5GEE Router for 3
seconds and the LED will begin flashing slowly.
Step 2: Select the 5GEE Router wireless network name (SSID) with a WPS
compatible device.
Wireless network name: 5GEE-Router-XXXX
Step 3: Click connect.
Note: Connect the wireless device to the 5GEE Router wireless network
via WPS within 2 minutes of pressing the WPS button. The WPS feature
will be disabled if WiFi security is set to WPA3 or Disabled, or Broadcast
SSID is turned off.
9