Functional Overview; Front And Rear Panels - Philips LX700 User Manual

Functional Overview

Front and Rear panels

C
6 CHANNEL INPUT
5
1
SURROUND
– to select multichannel surround(Dolby Digital, DTS,
Dolby Pro Logic or Dolby Pro Logic II) or stereo
sound effect.
TUNING S T
2
– to select the tuner frequency.
3
BASS
– to select bass adjustment mode.
4
TREBLE
– to select treble adjustment mode.
5
STANDBY ON y
– to switch between power on and standby mode.
6
DISPLAY SCREEN
– shows the status of the system.
1
6 7 8 9
1
DIGITAL OUT
– connect to the digital inputs of an external audio
equipment.
– is active only when receiving input from DIGITAL IN
(Coaxial or Optical).
2
WOOFER LINE OUT
– connect to an active subwoofer (optional).
3
SPEAKERS
– connect to the front,center, surround and subwoofer
speakers.
4
DVD/SACD IN
– connect from the 6 channel output of a DVD or SACD
player.
5
AC POWER CORD
– connect to a standard AC outlet.
F
6
UNCTIONAL OVERVIEW
1
6
7
PROGRAM
– in Tuner mode, to program MW/FM stations.
8
SOURCE
– to select the desired source or external input source
(TV/AV, DISC DI, DISC 6CH, TUNER or AUX).
9
VOLUME
– to adjust the master volume.
0
PHONE
– to connect headphones.
2 3
.
+ +
6
MW / FM
– connect to the MW loop antenna or FM antenna
7
DIGITAL IN
– connect from audio equipment with digital (Coaxial or
Optical) audio output.
8
AUDIO IN (TV/AV, AUX)
– connect from the analog audio outputs of a TV or
other equipment.
9
AUDIO OUT
– connect to the analog audio inputs of an external
recording device or amplifier.
Caution: Do not touch the inner pins of the jacks on
the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
2 3 4
7 8
4
.
9 0
5
AC MAINS ~