Table of Contents
Advertisement
Quick Links
ENGLISH
Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged in any
way, it must be replaced immediately with an original spare part from the manufacturer.
Always make sure that the grounding of the device is maintained. Use only the supplied
power cords and always maintain the side grounded contacts. Make sure that the sockets
used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by swallowing
parts!
DANGER! (Hearing damage)
Professional speaker systems are able to generate harmful sound levels. Even the influence
of seemingly harmless sound levels over a longer period of time can lead to permanent
damage to the hearing (from approx. 95 dBA SPL).
Therefore, always wear professional hearing protection (earplugs or capsule ear protectors)
during operation!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources,
naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FAME Explorer 2.10
Summary of Contents for FAME Explorer 2.10
- Page 1 ENGLISH Important safety instructions! Please read before connection! DANGER! (Electrical shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage. Before each use, check the device for damage or the absence of components, protective devices or housing parts.
- Page 2 ENGLISH Hint! (Operating conditions) In advance, it must be clarified with the manufacturer whether the device is also suitable for outdoor use. Always keep a minimum distance of 20 cm from walls or other structural objects. Never expose the device to direct rain, moisture or liquids, as this can lead to damage. Vibrations, dust or sunlight can also cause damage, avoid them! Hint! (Power supply) It is essential that you check that the device voltage matches your local mains voltage.
- Page 3 ENGLISH Symbols on device and packaging: The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock. The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual. The lightning warns you of dangerous voltage accessible from the outside. A connection to any terminal marked with this symbol may only be made with a ready-made cable that complies with the manufacturer's recommendations or with cables installed by qualified personnel.
-
Page 4: Installation
ENGLISH Installation: Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use. During assembly, suitable protective equipment (in particular head protection, gloves and safety shoes) must be worn and only suitable climbing aids (ladders, scaffolding, etc.) must be used. - Page 5 ENGLISH Hint! (Special measures) Special measures may also be required to prevent spectators from behaving dangerously. Tripods must not be set up in escape and rescue routes. When installing in traffic routes, the required width of the paths and proper blocking and marking must be ensured. When setting up and setting down a special hazard.
-
Page 6: Intended Use
Speaker Cable Intended use: The product Fame Explorer 2.10 is optimized for use with music and speech signals. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use. - Page 7 ENGLISH Set up: All connections of the device should be made before switching on. Only use high-quality and undamaged cables that are as short as possible for the connections. Configuration of the audio input connector CH1 – CH4 XLR/jack (6,35mm) – jack combo, balanced...
- Page 8 ENGLISH CH5 – CH6 RCA/Cinch – Mono/Stereo (6,35mm) CH7 – CH8 AUX, 3,5mm Stereo-Jack...
-
Page 9: Connections And Controls
ENGLISH Connections and controls:... - Page 10 ENGLISH Designation Designation Setup Switch Echo Left: Stereo-Mode Control for setting the echo effect Right: Mono-Mode CH1 – CH4 Input Delay XLR/Jack (6,35mm) mono balance Control for setting the delay effect Input CH1 – CH4 Level – Control Subwoofer Volume Control Volume control for the Control for adjusting the volume of the individual inputs...
-
Page 11: Operation
ENGLISH Operation: The Fame Explorer 2.10 can be operated in stereo mode as well as in mono mode. The setting is done via the setup switch (1) on the back of the subwoofer. Stereo mode In stereo mode both outputs are active and the two satellite speakers are split to be used as a... -
Page 12: Mono Mode
ENGLISH Mono mode In mono mode, only the left output is active and the two satellite speakers are connected together to concentrate their power on one output. Mono mode includes either a compact mono setup (A) or the standard mono setup (B). - Page 13 ENGLISH Notice: Please note that the tripods are not included in the scope of delivery, but must be purchased as an option. The Explorer Tripod SET from Fame (item number PAH0021771-000) is recommended as a suitable tripod.
-
Page 14: Technical Data
ENGLISH Technical data: Model Explorer 2.10 Type Subwoofer Satellite Quantity Mono-Mode: 60 Watt RMS Power Output 250 Watt RMS Stereo-Mode: 120 Watt RMS Subwoofer 10“ WF: 4,75“ Satellite TW: 1“ Power Output Total 350 Watt RMS Fuse T3.15AL/250V Frequency fange 50 Hz –... -
Page 15: Troubleshooting
ENGLISH Troubleshooting: The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the device on your own! Symptom Troubleshooting No function Check the network connection and the fuse Check the cable connections at the inputs and outputs No sound from loudspeaker, but... -
Page 16: Environmental Protection
ENGLISH Environmental protection: The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please dispose of and recycle the packaging components after use properly. Disposal of packaging: Ensure that paper packaging, plastic materials, etc. - Page 17 ENGLISH Notes MS ID: PAH0021649-000 09/2021...
Need help?
Do you have a question about the Explorer 2.10 and is the answer not in the manual?
Questions and answers