Table of Contents
Advertisement
Quick Links
®
INSTRUCTIONS
This manual is specifically for the REV A version of ShadeFin, which features
mushroom pull pin release buttons (Figure B, page 11). If your ShadeFin
features push buttons instead of pull pins, please refer to the manual titled:
SHADEFIN MANUAL REV B – PUSH BUTTON on tacomarine.com.
AVAILABLE MOUNTING OPTIONS
Fixed Rod Holder Mount, T10-3000-5
•
Adjustable Rod Holder Mount, T10-3000-6
•
Gunnel Rod Holder Adapter, T10-3000-12
•
Adjustable Clamp-On Mount, fits 3/4", 1" pipe & 1-1/4" tube, T10-3000-7
•
Telescopic Rod Holder Accessory, T10-3000-9
•
Hardtop Mount Bracket, T10-3000-10
•
Fixed Clamp-On Mount, fits 3/4", 1" pipe & 1-1/4" tube, T10-3000-11
•
Gunnel Rod Holder Adapter, 1-1/2" O.D. X 13.5" L, T10-3000-12
•
Grand Slam 170 Outrigger Mount, GS-170
•
Grand Slam 170-2 Center Rigger Mount, GS-170-2
•
PATENT NO. 10,604,214; 11,220,312
Advertisement
Table of Contents
Related Manuals for Taco Marine SHADEFIN T10-3000-5
Summary of Contents for Taco Marine SHADEFIN T10-3000-5
- Page 1 PATENT NO. 10,604,214; 11,220,312 ® INSTRUCTIONS This manual is specifically for the REV A version of ShadeFin, which features mushroom pull pin release buttons (Figure B, page 11). If your ShadeFin features push buttons instead of pull pins, please refer to the manual titled: SHADEFIN MANUAL REV B –...
-
Page 2: Table Of Contents
S H A D E F I Thank you for purchasing ShadeFin by TACO Marine. Since 1959, we have taken great pride in offering the highest-quality products with excellent customer service. We stand behind our products 100 percent. Please visit our website tacomarine.com for more detailed information on a wide variety of products and to register your new accessory for warranty. -
Page 3: Fixed Rod Holder Mount
FIXED ROD HOLDER MOUNT INSTALLATION T10-3000-5 The Fixed Rod Holder Mount fits into any standard rod holder or into a gunnel rod holder with an adapter (T10-3000-12, included in the kit), or into the Telescopic Rod Holder Ac- cessory (T10-3000-9, sold separately, see below). To use this mount in a T-top rod holder, first check to ensure the rod holder is firmly welded in place. -
Page 4: Gunnel Rod Holder Adapter
GUNNEL ROD HOLDER ADAPTER INSTALLATION T10-3000-12 WARNING: Do not install the ShadeFin® Fixed or Adjustable Rod Holder Mount into a gunnel rod holder without the use of the supplied Gunnel Rod Holder Adaptor. This will damage the threads and void the warranty. 1. - Page 5 GUNNEL ROD HOLDER ADAPTER INSTALLATION CON’T T10-3000-12 CORRECT GUNNEL ROD HOLDER INSTALLATION WITH ADAPTER Gunnel Gunnel Mount Adapter Tube Mount Adaptor Tube INCORRECT GUNNEL ROD HOLDER INSTALLATION WITHOUT ADAPTER Gunnel Installation of the mount without the adaptor tube in a gunnel installation will damage the threads and void warranty @tacomarine...
- Page 6 FIXED & ADJUSTABLE CLAMP-ON MOUNTS At TACO Marine, we always encourage the use of safety glasses and gloves when working on the installation of these products. T10-3000-7 T10-3000-11 PLEASE NOTE: These mounts are designed to fit: Required *not included 3/4” and 1” schedule-40 pipe •...
- Page 7 FIXED & ADJUSTABLE CLAMP-ON MOUNTS Drill and Prepare the Rotation/Set Pin Hole IMPORTANT – Before drilling, ensure there are no electrical wires inside the pipe or tube. It is best to “center-punch” the mark prior to drilling the 1/4” hole. •...
- Page 8 CLAMP-ON MOUNT TECHNICAL DRAWING Tech Support: support@tacomarine.com https://tacomarine.com/technical-support...
-
Page 9: Adjustable Rod Holder Mount
ADJUSTABLE ROD HOLDER MOUNT INSTALLATION T10-3000-6 The Adjustable Rod Holder Mount fits into any standard rod holder or into a gunnel rod holder with an adapter (T10-3000-12, included in the kit), or into the Telescopic Rod Holder Accessory (T10-3000-9, sold separately, see page 4). To use this mount in a T-top rod holder, first check to ensure the rod holder is firmly welded in place. - Page 10 GRAND SLAM 170 OUTRIGGER & GRAND SLAM 170-2 CENTER RIGGER MOUNT INSTALLATION GS-170 & GS-170-2 Alignment Pin Locking Pin FIGURE A If your GS-170 Outrigger or GS-170-2 Center Rigger Mounts are already installed, please skip to step 3. If you purchased a GS-170 or GS-170-2 specifically for use with ShadeFin, please follow the installation instructions included with these products.
-
Page 11: Operation & Deployment
OPERATION & DEPLOYMENT Once ShadeFin is securely attached to its mount, follow these instructions for setup. To set up your ShadeFin, pull down on one of the front arm release buttons inside the body while simultaneously pulling out the front arm on the same side (Figure B). Do not pull the arm to its fully locked position yet. -
Page 12: Replacing The Fabric
REPLACING THE FABRIC Place the ShadeFin on a wide, flat surface/table with the Required aluminum base facing down. *not included Using a 5/32” Allen wrench, completely loosen the four • 5/32” ALLEN WRENCH bolts and mating washers from the top of the molded, plastic cover. -
Page 13: Cleaning & Fabric Care
CLEANING & FABRIC CARE FRAME CLEANING FABRIC CARE Brush off loose dirt. Clean using only fresh water. Hose down with fresh water. Prepare a cleaning solution of water and mild soap. Use a soft bristle brush to clean. Rinse thoroughly until all soap residue is removed. Air dry. -
Page 14: Stowage
STOWAGE SHADEFIN® While applying a slight forward pressure to the front arms, pull down on the locking buttons and allow the front arms to unlock and swing freely (Figure B). Fold the front two arms together while lifting the fabric up between them. -
Page 15: Warning
WARNING WARNING IMPROPER USE CAN CAUSE SERIOUS INJURY OR DEATH REMOVE AND STOW SHADEFIN WHILE BOAT IS UNDERWAY. LOCK ALL MOUNTS AND PINS BEFORE DEPLOYING SHADEFIN. MOVING PARTS CAN PRODUCE PINCH POINTS. KEEP HANDS CLEAR! SHADEFIN WARNING LABEL V2 Thursday, July 23, 2020 11:19:42 AM... - Page 16 Like, subscribe and follow us on YouTube, Facebook, Instagram and Twitter, where we post regular boating content and engaging how-to videos. @tacomarine @taco_marine #ShadowInSeconds...