Philips DVP5982 User Manual page 40

DVD Menu Options
Digital Output
Set the Digital Output according to your
optional audio equipment connection.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{ PCM Only }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
{ Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
jacks to connect to a TV or stereo
system.
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
40
01-57_dvp5982_37_eng3.indd 40 01-57_dvp5982_37_eng3.indd 40
(continued)
HDMI Audio Setup
This function allows you to set the digital
audio to output via HDMI cable.
{ On }
To enable the HDMI digital audio to
output via HDMI cable.
{ Off }
To disable the HDMI digital audio to
output via HDMI cable.
Tips:
– {Digital Output} and {LPCM Output} are
only applicable when {HDMI Audio Setup} is
set to {Off}.
– If {HDMI Audio Setup} is set to {Off}, no
sound could be hear through HDMI
connection.
– If {HDMI Audio Setup} is set to {On}, it is
possible to hear PCM audio fi le via coaxial
connection.
2007-06-13 2:13:00 PM 2007-06-13 2:13:00 PM