Playback Features; Starting Disc Playback; Basic Playback Controls; Pausing Playback - Philips DVP5982 User Manual

Playback Features

Starting disc playback

A
Turn on the TV to the correct program
number for the DVD player (e.g. 'EXT',
'0', 'AV').
Press STANDBY-ON 2 to turn on
B
the DVD player.
Press OPEN/CLOSE ç on the front of
C
the DVD player.
You can also hold down the STOP
button on the remote control to open
and close the disc tray.
D
Place a disc into the disc tray with the
label facing up, then press OPEN/
CLOSE ç.
For double-sided discs, load the side
which you want to play facing up.
E
Playback may start automatically.
If not, press PLAY/PAUSE u.
If a disc menu appears on the TV, see
page 27 'Using the Disc Menu'.
If the child lock was activated for the
inserted disc, you have to enter your six-
digit password (see page 49).
For more playback features, see pages
26~36.
Tips:
– Do not overturn the DVD player while disc
loading, playing or ejecting.
– Do not close the disc tray manually even if
the power switched off.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
26
01-57_dvp5982_37_eng3.indd 26 01-57_dvp5982_37_eng3.indd 26

Basic playback controls

Unless otherwise stated, all operations
described are based on Remote Control
use.

Pausing playback

A
During playback, press PLAY/PAUSE
u to pause playback and display a still
picture.
Sound will be muted.
B
To resume normal playback, press
PLAY/PAUSE u again.

Selecting title/chapter/track

During playback, press PREV í to go
to the beginning of the currect chapter/
track, press PREV í again to go to the
previous title/chapter/track.
Press NEXT ë to go to the next
chapter/track.
Press DISPLAY to display the disc
information text line for title/chapter/
track (example - 00/08).
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number.
The playback skips to the selected
title/chapter/track.

Stopping playback

Press STOP .
Tips:
– Screen saver will start automatically if the
disc playback is stopped/paused for about 5
minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for about 15 minutes after the disc
has stopped playing.
2007-06-13 2:12:57 PM 2007-06-13 2:12:57 PM